background image

 

103 

buffer egress queue guaranteed 

Syntax 

buffer egress 

slot 

slot-number

 

]

 

{

 cell 

|

 packet 

}

 queue 

queue-id

 guaranteed ratio 

ratio

 

undo buffer egress 

slot 

slot-number

 

]

 

{

 cell 

|

 packet 

}

 queue 

queue-id

 guaranteed 

View 

System view 

Default level 

2: System level 

Parameters 

slot 

slot-number

: Specifies an IRF member switch number. For a standalone switch, the 

slot-number

 

argument can only be 1. In an IRF virtual device, if an IRF member switch is specified, this command 
applies only to the member switch; if no member switch is specified, this command applies to all member 

switches.  

cell

: Configures the minimum guaranteed resource size for a queue in the cell resource.  

packet

: Configures the minimum guaranteed resource size for a queue in the packet resource. This 

keyword is not available on the S5820X Switch Series.  

queue-id

: Specifies a queue ID, in the range of 0 to 7.  

ratio

: Sets the minimum guaranteed resource size for the specified queue as a percentage of the 

dedicated buffer per port. The value range is 0 to 100. 

 

Description 

Use the 

buffer egress queue guaranteed

 command to configure the minimum guaranteed resource size 

for a queue in the cell resource or packet resource.  
Use the 

undo

 

buffer egress queue guaranteed

 command to restore the default.  

By default, the minimum guaranteed resource size for a queue is 12% of the dedicated buffer of the port 
in both the cell resource and the packet resource.  
The minimum guaranteed resource settings apply to the queue with the same number on each port.  
The dedicated resource of a port is shared by eight queues. After you change the minimum guaranteed 

resource size for a queue, the switch will automatically allocate the remaining dedicated resource among 

all queues that are not manually assigned a minimum guaranteed resource space. For example, if you set 

the minimum guaranteed resource size to 30% for a queue, the other seven queues will each share 10% 
of the remaining dedicated resource of the port.  

Examples 

# Set 20% of the dedicated buffer per port as the minimum guaranteed resource for queue 0 in the cell 

resource.  

<Sysname> system-view 

[Sysname] buffer egress cell queue 0 guaranteed ratio 20 

# In an IRF, set 15% of the dedicated buffer per port as the minimum guaranteed resource for queue 0 
in the cell resource on member switch 2.  

<Sysname> system-view 

[Sysname] buffer egress slot 2 cell queue 0 guaranteed ratio 15 

Summary of Contents for s5820x series









































































































































Reviews: