67
SFP+ port LED
The switch provides a SFP+ port LED for each SFP+ port. The SFP+ port LED indicates the operating state
of the SFP+ port.
Table 31
SFP+ port LED description
LED status
Description
Steady green
A transceiver module is installed and a link is present on the port. The port is
operating at 10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module is installed and a link is present on the port. The port is
operating at 1 Gbps.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
POST has failed on the port.
Off
No transceiver module is installed or no link is present on the port.
Management Ethernet port LED
The switch provides an ACT/LINK LED to indicate the operating state of the management Ethernet port.
Table 32
Management Ethernet port LED description
ACT/LINK Description
Steady green
A link is present on the port.
Flashing yellow (1 Hz)
The port is sending or receiving data.
Off
No link is present on the port.
Expansion slot LED
The expansion slot LED on the front panel indicates the operating state of the expansion card.
Table 33
Expansion slot LED description
SLOT/SLOT1/SLOT2 Description
Steady green
An expansion card is in position and is operating correctly.
Flashing yellow (1 Hz)
The switch does not support the card model, or the card has failed.
Off
The expansion slot is empty.