manualshive.com logo in svg

H3C S5560-EI series, Troubleshooting Manual, Page: 50 / 58

Share
Download
H3C S5560-EI series Troubleshooting Manual Download Page 50

 

46 

When you contact H3C Support, provide the following diagnostic information if packet loss 

occurs on the chip port with which the interface is associated: 
# In probe view, execute the 

debug port mapping

 command to identify the chip port with 

which the interface is associated. 

[Sysname-probe]debug port mapping slot 1 

 

[Interface] [Unit] [Port] [Name] [Combo?] [Active?] [IfIndex]  [MID]  [Link] 

==============================================================================

= 

 GE1/0/1         0      2     ge1     no        no      0x40        3     down 

 GE1/0/2         0      1     ge0     no        no      0x41        3     down 

 GE1/0/3         0      4     ge3     no        no      0x42        3     down 

 GE1/0/4         0      3     ge2     no        no      0x43        3     down 

 GE1/0/5         0      6     ge5     no        no      0x44        3     down 

 GE1/0/6         0      5     ge4     no        no      0x45        3     down 

 GE1/0/7         0      8     ge7     no        no      0x46        3     down 

 GE1/0/8         0      7     ge6     no        no      0x47        3     down 

 GE1/0/9         0      10    ge9     no        no      0x48        3     down 

 GE1/0/10        0      9     ge8     no        no      0x49        3     down 

 GE1/0/11        0      12    ge11    no        no      0x4a        3     down 

 GE1/0/12        0      11    ge10    no        no      0x4b        3     up 

 GE1/0/13        0      14    ge13    no        no      0x4c        3     down 

 GE1/0/14        0      13    ge12    no        no      0x4d        3     down 

 GE1/0/15        0      16    ge15    no        no      0x4e        3     down 

 GE1/0/16        0      15    ge14    no        no      0x4f        3     up 

 GE1/0/17        0      18    ge17    no        no      0x50        3     down 

 GE1/0/18        0      17    ge16    no        no      0x51        3     down 

 GE1/0/19        0      20    ge19    no        no      0x52        3     up 

 GE1/0/20        0      19    ge18    no        no      0x53        3     down 

---- More ----  

The output shows that GigabitEthernet 1/0/17 is associated with chip port ge17. 
# Execute the 

bcm 1 0 show/c/xe0

 command to check the RDBGC and TDBGC fields for Rx 

and Tx dropped packet statistics, respectively. The statistics displayed were generated 

between the last and the current execution of the command. To view the change in dropped 

packet statistics, execute the command twice or more. 

[Sysname-probe]bcm slot 1 chip 0 show/c/ge17 

RDBGC3.ge17       :                     5                  +5 

RDBGC6.ge17       :                     5                  +5 

R64.ge17          :                    19                 +19 

R127.ge17         :                   163                +163               1/s 

R255.ge17         :                    10                 +10 

R511.ge17         :                     6                  +6 

RPKT.ge17         :                   198                +198               2/s 

RMCA.ge17         :                   136                +136               1/s 

RBCA.ge17         :                    62                 +62 

RPOK.ge17         :                   198                +198               2/s 

RBYT.ge17         :                21,392             +21,392             315/s 

 

Summary of Contents for S5560-EI series



























































Reviews:

No comments