355
Step Command
Remarks
4.
Specify the source interface
for route update packets.
peer
{
group-name
|
ip-address
}
connect-interface
interface-type
interface-number
By default, BGP uses the outbound
interface of the best route to the
BGP peer.
5.
Enter BGP-VPNv6 subaddress
family view.
ipv6-family vpnv6
N/A
6.
Enable the exchange of
BGP-VPNv6 routing
information with the specified
peer.
peer
ip-address
enable
By default, BGP peers exchange
only IPv4 routing information.
Configuring routing features for the BGP-VPNv6 subaddress
family
A variety of routing features for the BGP-VPNv6 subaddress family are the same as those for BGP IPv6
unicast routing. You can select any of the features as required.
To configure routing features for the BGP-VPNv6 subaddress family:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Configure the remote PE as
the peer.
peer
ip-address
as-number
as-number
N/A
4.
Specify the interface for TCP
connections.
peer
ip-address
connect-interface
interface-type interface-number
N/A
5.
Enter BGP-VPNv6 subaddress
family view.
ipv6-family vpnv6
N/A
6.
Set the default value of the
local preference.
default local-preference
value
Optional.
100 by default.
7.
Set the default value for the
system MED.
default med
med-value
Optional.
By default, the default value of the
system MED is 0.
8.
Configure a filtering policy to
filter routes to be advertised.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
direct
|
isisv6
process-id
|
ripng
process-id
|
static
]
Optional.
By default, the PE does not filter
routes to be advertised.
9.
Configure a filtering policy to
filter received routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
Optional.
By default, the PE does not filter
received routes.
10.
Apply a filtering policy for the
peer.
peer
ip-address
filter-policy
acl6-number
{
export
|
import
}
Optional.
By default, no filtering policy is
applied for a peer.
