1-12
and the system enters the user view of the slave and the command prompt is changed to
<Sysname-Slave#X>, where X is the member ID of the device, for example, <Sysname-Slave#2>.
After this command is executed, the instructions that you input at the terminal will be forwarded to the
specified slave, without being processed by the local device. Currently, you can execute the following
commands on a slave:
z
display
z
quit
z
return
z
system-view
z
debugging
z
terminal debugging
z
terminal trapping
z
terminal logging
You can return to the console of the master by executing the
quit
command. The master is therefore
reactivated and is ready for outputting information. However, you cannot redirect to the master of the
IRF virtual device with the
irf switch-to
command.
Examples
# Redirect to member 2.
<Sysname> system-view
[Sysname] irf switch-to 2
<Sysname-Slave#2>
