1-8
Figure 1-8
Front panel of the S5500-52C-PWR-EI Ethernet switch
(1) 10/100/1000 Base-T auto-sensing Ethernet port
(2) 10/100/1000 Base-T auto-sensing Ethernet port status LED
(3) Console port
(4) Seven-segment LED
(5) Port mode LED (Mode)
(6) System status LED (PWR)
(7) RPS status LED (RPS)
(8) Interface module 1 status LED (MOD1)
(9) Interface module 2 status LED (MOD2)
(10) Port status LED mode switching button
(11) 1000 Base-X SFP port
(12) 1000Base-X SFP port status LED
Rear Panel
Figure 1-9
Rear panel of the S5500-52C-PWR-EI Ethernet switch
(1) RPS power input
(2) AC power input
(3) Grounding screw
(4) Interface module slot 1 (MOD1)
(5) Interface module slot 2 (MOD2)
The S5500-52C-PWR-EI provides two interface module slots on its rear panel. Each slot is installed
with a filler panel when the switch is shipped. You can select one or two interface modules for your
switch as needed. See
Optional Interface Modules
on page
1-17
for the interface module models
supported by the S5500-EI series, and see
Installing an Interface Module
on page
3-21
for the
installation of interface modules.
S5500-28F-EI
Front Panel
The S5500-28F-EI Ethernet switch provides 24 × 100/1000Base-X SFP ports, eight
10/100/1000Base-T auto-sensing Ethernet ports and one console port on the front panel. The last eight
SFP ports and the eight 10/100/1000Base-T Ethernet ports comprise eight Combo ports, with one port
of a Combo port working at a time.