H3C S5130S-28C-HI, Installation Manual, Page: 85 / 91

8-80
IMPORTANT:
The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI modules must be used in pairs.
NOTE:
•
As a best practice, use only H3C SFP transceiver modules and cables for the SFP ports.
•
The H3C SFP transceiver modules and cables available for the SFP ports are subject to change
over time. For the most recent list of SFP transceiver modules and cables available for the SFP
port, contact your H3C Support or marketing staff.
•
For the specifications of H3C SFP transceiver modules and cables, see H3C Transceiver
Modules User Guide .
SFP+ port
The following switches each provide four fixed SFP+ ports on the front panel:
•
S5560S-28F-EI
•
S5560S-52F-EI
•
S5560S-28S-EI
•
S5560S-52S-EI
•
S5560S-28S-PWR-EI
•
S5560S-52S-PWR-EI
•
S5130S-28C-HI
•
S5130S-28S-HI
•
S5130S-52S-HI
•
S5130S-28C-PWR-HI
•
S5130S-28S-PWR-HI
•
S5130S-28S-UPWR-HI
•
S5130S-52S-PWR-HI
The S5130S-52C-HI and S5130S-52C-PWR-HI switches each provide two fixed SFP+ ports on the
front panel.
To connect peer SFP+ ports over a long distance, use SFP/SFP+ transceiver modules and fibers. To
connect peer SFP+ ports over a short distance, use SFP+ cables. You can install the GE SFP
transceiver module in
Table 8-5 , 10-GE SFP+ transceiver modules in Table 8-6 , and 10-GE SFP+
cables in Table 8-7 in the SFP+ ports.
Table 8-6 10-GE SFP+ transceiver modules available for the SFP+ ports
10-GE SFP+
module
Central
wavelength
(nm)
Connector
Fiber
diameter
(µm)
Multimode fiber
modal
bandwidth
(MHz × km)
Max
transmission
distance
SFP-XG-SX-M
M850-D
850 LC
Multi-mode,
50/125
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
Multi-mode,
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)