Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 Traffic Classification, TP, and TS
Configuration
2-8
To decrease the number of the packets dropped, you can employ TS on the port of
Switch A through which the packets are sent to Switch B. So, packets are cached on
Switch A when the traffic sent to Switch B exceeds the TS threshold. When the next
batch of packets can be sent, the cached packets are sent to Switch B. Such scheme
ensures that the traffic sent to Switch B conforms to the traffic limit of Switch B.
2.4 TP and TS Configuration
Complete the following tasks to configure TP and TS:
Operation
Description
Configure ACL
Apply TP policies to ports
Configure TS on ports
Configure TS on ports
2.4.1 Configuring TP
TP configuration includes the following two tasks: the first task is to define the
characteristics of the packets to be policed; the second task is to define policing policies
for the matched packets.
I. Configure ACL-based TP
Follow these steps to configure ACL-based TP:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create ACL rules
Refer to the
ACL
module in this
manual for detailed information
Required
Enter
port view
interface interface-type
interface-number
Enter
port
view or
port
group
view
Enter
port
group
view
port-group
{
manual
port-group-name | aggregation
agg-id
}
Perform either of the two
operations.
The configuration
performed in port view
applies to the current port
only. Configuration
performed in port group
view applies to all the ports
in the port group.
