Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 Traffic Classification, TP, and TS
Configuration
2-10
To do…
Use the command…
Remarks
Configure TS
qos gts
queue
queue-number
cir
committed-information-rate
Required
CIR must be a multiple of
650.
II. Configure TS for all traffic
Follow these steps to configure TS for all traffic:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter
port view
interface interface-type
interface-number
Enter
port
view
or port
group
view
Enter
port
group
view
port-group
{
manual
port-group-name | aggregation
agg-id
}
Perform either of the two
operations.
The configuration
performed in Ethernet port
view applies to the current
port only. The configuration
performed in port group
view applies to all the ports
in the port group.
Configure TS
qos gts
any cir
committed-information-rate
Required
CIR must be a multiple of
650.
III. TS configuration example
Configure TS for Ethernet1/0/1 port. Cache the packets when the traffic rate exceeds
1,300 kbps.
# Enter system view.
<Sysname> system-view
# Enter port view.
[Sysname] interface Ethernet 1/0/1
# Configure TS parameters.
[Sysname-Ethernet1/0/1] qos gts any cir 1300
