Operation Manual – ACL
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 IPv6 ACL Configuration
3-1
Chapter 3 IPv6 ACL Configuration
When configuring IPv6 ACLs, go to these sections for information you are interested in:
z
z
z
Configuring an Advanced IPv6 ACL
z
z
Displaying and Maintaining IPv6 ACLs
z
IPv6 ACL Configuration Example
3.1 Creating a Time Range
Refer to section
3.2 Configuring a Basic IPv6 ACL
Basic IPv6 ACLs filter packets based on source IPv6 address. They are numbered in
the range 2000 to 2999.
3.2.1 Configuration Prerequisites
If you want to reference a time range to a rule, define it with the
time-range
command
first.
3.2.2 Configuration Procedure
Follow these steps to configure an IPv6 ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Create and enter
basic IPv6 ACL view
acl ipv6
number
acl6-number
[
name
acl6-name
]
[
match-order
{
auto
|
config
} ]
Required
The default match order is
config
.
If you specify a name for an
IPv6 ACL when creating the
ACL, you can use the
acl
ipv6 name
acl6-name
command to enter the view of
the ACL later.
