Operation Manual – ACL
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 IPv6 ACL Configuration
3-6
3.4.2 Configuration Procedure
Follow these steps to copy an IPv6 ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Copy an existing IPv6
ACL to generate a new
one of the same type
acl ipv6 copy
{
source-acl6-number
|
name source-acl6-name
}
to
{
dest-acl6-number
|
name
dest-acl6-name
}
Required
Caution:
z
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
z
The generated ACL does not take the name of the source IPv6 ACL.
3.5 Displaying and Maintaining IPv6 ACLs
To do…
Use the command…
Remarks
Display information about
a specified or all IPv6
ACLs
display
acl
ipv6
{
acl6-number
|
all
|
name
acl6-name
}
Available in any view
Display the configuration
and status on time range
display
time-range
{
time-name
|
all
}
Available in any view
Clear statistics about a
specified or all IPv6 ACLs
that are referenced by
upper layer software
reset
acl
ipv6
counter
{
acl6-number
|
all
|
name
acl6-name
}
Available in user
view
3.6 IPv6 ACL Configuration Example
3.6.1 Network Requirements
As shown in
, a company interconnects its departments through the switch.
Configure an ACL to deny access of the R&D department to external networks.
