Quick Start (For Japan)
H3C S3100 Series Ethernet Switches
Chapter 3 Installation
3-14
2) Take out the screws packed together with the front mounting
ears and fix one end of the front mounting ears to the switch,
as shown in Figure 3-3.
3) Install guide rails on the brackets on both sides of the
cabinet with M5 self-tapping screws. Figure 3-11 is for
reference only.
Figure 3-11
Install guide rails
4) Hold the two sides of the switch and slide it gently along the
guide rails into the cabinet until it is located in a proper
position, as shown in Figure 3-12. Ensure that the bottom
side of the guide rails and the switch are in close contact.