9-4
Figure 9-2 Removing the device from the rack (S12516G-EF)
(1) Loosen the captive screws that attach the mounting brackets to the rack
(2) Chassis handles
(3) Slide the chassis out of the rack along the slide rails
Repacking the chassis
1.
Align the left and right edges of the chassis bottom with the left and right positioning lines
respectively on the wooden pallet base. See
Figure 9-3 Wooden pallet base
(1) Wooden pallet base
(2) Left positioning line
(3) Right positioning line
(4) Screw hole
(5) Front of the base (same direction as the front panel of the chassis)
2.
Use screws to attach L-type brackets to the chassis, as shown by callout 2 in
1
2
3
4
5