Manual version: 6PW102-20170411
BOM: 3123A0T2
i
H3C S12500-X LST1FW3B1 Card Manual
1
Card identifier
The card identifier LST1FW3B1 is at the upper right corner of the front panel.
2
Introduction
The LST1FW3B1 card provides one console port, one CF card interface, two USB interfaces, two
10/100/1000BASE-T Ethernet copper interfaces, and two Gigabit Combo interfaces.
You can use a combo interface to provide the following functions:
•
In-band management.
•
Outgoing interface for log messages.
•
Failover interface for stateful failover.
3
Specifications
Figure 1 Front panel
(1) Console port (CONSOLE)
(2) USB ports (hardware reserved, software not support currently)
(3) 10/100/1000BASE-T copper combo port
(4) 10/100/1000BASE-T copper combo port LED (LINK/ACT)
(5) 1000BASE-X fiber combo port
(6) 1000BASE-X fiber combo port LED (LINK/ACT)
(7) Alarm LED (ALM)
(8) System LED (RUN)
(9) Ejector lever
(10) Captive screw
Table 1 Card specifications
Item Specification
Flash
8 MB NOR flash, 16 bit wide
SDRAM
DDR3 SDRAM
2 slots for SDRAMs
Standard configuration: 16 GB (two 8 GB DDR3 SDRAMs)
Two same-sized DDR3 SDRAMs are required.
CF card
One built-in CF card slot
256 MB CF card, expandable to 1 GB
