44
NOTE:
For the QSFP+ module, you do not need to differentiate between the transmitter (TX) and receiver (RX)
ports. For other types of transceiver modules, the Tx port on one end must connect to the RX port on the
other end.
Figure 36
Using an LC optical fiber connector to connect an SFP module
Figure 37
Using an MPO optical fiber connector to connect a QSFP module
Testing connectivity
After you plug the switch into the network, use the
ping
or
tracert
command to test the network
connectivity. For more information about these commands, see
H3C S10500 Switch Series Command
References
.
LC plug
SFP module
MPO plug
QSFP+ module
