18
Follow these steps to attach the OT terminal of the grounding cable
to the grounding hole of the RPS unit:
1.
Remove the grounding screw from the rear panel of the RPS
unit.
2.
Attach the grounding screw to the OT terminal of the grounding
cable.
3.
Use a screwdriver to fasten the grounding screw into the
grounding screw hole.
Figure 9 Connect the grounding cable to the grounding hole of
the RPS unit
(1) Rear panel of the RPS unit
(2) Grounding hole
(3) OT terminal
(4) Grounding cable
(5) Grounding screw
4.
Connect the other OT terminal of the grounding cable to the
grounding pole of the grounding strip, and fasten it with a hex
nut.
