4
2.3 Rear Panel
(1) AC input for power module 2
(2) AC input for power module 1
(3) 25-A output reset buttons
(4) DC 25-A outputs
(5) DC 8-A outputs
(6) Grounding screw
(7) Fuses for the 8-A outputs
Figure 2
Rear panel of the RPS1000-A3
Note:
z
Each of the two AC inputs is for one power
module;
z
One reset button is provided for each of the two
25-A outputs. The left reset button controls the left
25-A output, while the right reset button controls
the right 25-A output. For the usage of the reset
buttons, refer to Table 3 on page 6;
z
One replaceable fuse is provided for each 8-A
output immediately below it. For the usage of the
six fuses, refer to Table 3 on page 6 and 3.5
Replacing Fuses on page 26.
