5
Figure 3 Removing a filler panel
4.
Insert the power module into the slot, as shown in
a.
Correctly orient the power module with the characters
upward.
b.
Holding the power module handle with one hand and
supporting the power module bottom with the other, slide the
power module along the guide rails into the slot. When the
power module is completely inserted into the slot, you can
hear that the latch of the power module clicks into the slot.
If the power module is not aligned with the slot, pull out the
power module, adjust its direction, and insert it again.
Figure 4 Installing the power module
1
2
