3
•
Callout (2) is used to control the PoE power output.
The PSR6000-ACV provides PoE power output on the premise that:
•
The system power switch is on and the system power output is
normal;
•
The PoE power switch is on and PoE input is available on at
least one of the three PoE sockets.
PoE output power of the PSR6000-ACV varies with number of PoE
power input lines. You can add or remove lines of PoE power
supplies as needed. For details, see
In addition to providing dedicated PoE power supplies for devices
supporting PoE, PoE power output can also be used as
supplementary power supply for devices that do not support PoE:
•
With only the system power switch turned on, the maximum
power output of the system is 1150 W (110 VAC) or 1400 W (220
VAC).
•
If the power requirements of the entire system exceed the
maximum system power provided by the PSR6000-ACV, PoE
power output can be used as supplements. To do this, turn on
the PoE power switch and select lines of PoE power supplies as
needed. For details, refer to the installation manual of related
devices.
CAUTION:
•
Input voltage for the system power input, PoE 1, PoE 2, and
PoE 3 must be the same. It can be either 110 VAC or 220
VAC for power supplies of the power module.
•
Turn off the PoE power switch if PoE power supply is not
required by the device. For more information, see the
installation guide or hardware information and specifications
for the device.
