2-5
Figure2-5 Rear mounting bracket and shoulder screw
(1) Screw hole for attaching the bracket to the rack
(2) Shoulder screw
Rack-mounting the switch by using only front mounting
brackets
All switch models except the S6520X-54HC-UPWR-EI support rack mounting by using only front
mounting brackets.
Attaching the front mounting brackets to the switch
The switch has one mounting position near the network ports and the other mounting position near
the power supplies for the front mounting brackets. Select one position as needed.
To attach the front mounting brackets to the chassis:
1.
Place the wide flange of the mounting bracket against the chassis side panel. Align the
mounting bracket installation holes with the screw holes in the chassis.
To install the mounting brackets at the port-side mounting position, see
To install the mounting brackets at the power supply-side mounting position, see
2.
Fasten the M4 screws to secure the mounting bracket to the switch.
3.
Attach the front mounting bracket to the other side of the chassis in the same way.
1
2