10
Figure 5 Power supply removal procedure
Before removing a power supply, prepare an ESD wrist strap and a
Phillips screwdriver yourself.
Removing the power cord
1.
Turn off the circuit breaker switch for the power supply.
After the circuit breaker switch for the power supply is turned off,
the input status LED on the power supply will remain on for a
while.
2.
Wear an ESD wrist strap, and make sure the strap makes good
skin contact and is reliably grounded.
3.
Remove the releasable cable tie from the power cord and then
remove the power cord connector from the power input
receptacle.
