15
Figure 20 Logging in to the Web interface of the IMC platform
Configuring RAID
About RAID
Redundant Array of Independent Disks (RAID) ensures data reliability and speeds up data reading
and writing by storing data in multiple hard disks.
By default, the EAD gateway is built with dual SIC-M2-SATA drives and the drives have been
configured to operate in RAID 1 mode. The drive name of the RAID is
md0
. No manual configuration
is required. If reconfiguring the RAID is required, you must follow the restrictions and guidelines in
this section.
Restrictions and guidelines for RAID configuration
VM
EAD_VM
is installed in the root directory of RAID
md0
. Perform the tasks in this section with
caution. If data on RAID
md0
is cleared, the VM is removed from the EAD gateway. In this situation,
you must redeploy the VM on the EAD gateway.
