7
Figure 8 Configuring IP address settings for the management host
Verifying the configuration
# Verify that the management host can ping the EAD gateway and the EAD gateway can ping the
management host. (Details not shown.)
Preparing for VNC Viewer login
About this task
To use VNC Viewer to log in to the desktop of the VM, you must obtain the VM name and VNC port
number and make sure the VM has been started. Perform this task to obtain the VM name and VNC
port number and view the VM status.
By default, the VM name on the EAD gateway is
EAD_VM
and the VNC port number is 98.
Obtaining the VM name and VM status
Log in to the CLI of the EAD gateway and use the
display vmlist
command to obtain the VM
name and status. If the VM is in shutoff state, use the
start vm
command to start the VM.
# Obtain the VM name and status.
<H3C> display vmlist
Id Name Status
------------------------------------------
- EAD_VM running
# (Optional.) Start the VM.
<H3C> system-view
[H3C] vmm
[H3C-vmm] start vm EAD_VM
Domain EAD_VM started
Obtaining the VNC port number of the VM
# Obtain the VNC port number of the VM.
<H3C> display vncport vm EAD_VM
:98
