84
Step5
Check that the ejector clips have locked the memory module.
Figure 86
Install a memory module
Follow the steps below to remove a memory module:
Step1
Make sure all power interfaces are shut down.
Step2
Press the ejector clips on the two sides of the memory module, and pull the memory module outwards
horizontally until it separates from the ejector clips and forms an angle of 45 degrees to the main board.
Step3
Remove the memory module.
Figure 87
Remove a memory module
Installing/removing a memory module on/from the other modules
Follow the steps below to install a memory module:
Step1
Make sure all power interfaces are shut down.
Step2
Align the connecting fingers of the memory module with the slot on the main board.
Step3
Insert the memory module into the slot in the direction of 90 degrees to the main board.
Step4
Press the edge of the memory module vertically down until you hear a click.
Step5
Check that the ejector clips have locked the memory module.