47
Figure 52
Slot arrangement on the MSR 30-60
(1) Slot 0
(2) Slot 1
(3) Slot 2
(4) Slot 3
(5) Slot 4
(6) Slot 5
(7) Slot 6
(8) Slot 7
(9) Slot 8
(10) Slot 9
(11) Slot 10
Interface numbering
The MSR 30 Router interface adopts “two dimension” numbering rules, shown in the following:
•
The interfaces are represented by
interface-type X/Y
, where
interface-type
can be serial,
asynchronous, ethernet or ATM, and so on;
X
specifies the slot number;
Y
specifies the interface
number.
•
Different interfaces on an interface module share the same slot number X.
•
For every interface, Y starts from 0 and indicates the interface sequence on the interface module,
from left to right.
If you install a MIM-1FE and an MIM-2FE respectively in slot 5 and slot 6 on the MSR 30-20, the Ethernet
interfaces are numbered as follows:
•
Fixed Gigabit Ethernet interfaces are GigabitEthernet 0/0 and GigabitEthernet 0/1;
•
The Ethernet interface on the FIC-1FE is Ethernet 5/0;
•
The Ethernet interfaces on FIC-2FE are Ethernet 6/0 and Ethernet 6/1.
