3-2
Replacing a DSIC
CAUTION:
Do not hot swap DSICs. Make sure the router is powered off before installing a DSIC.
To replace a DSIC:
1.
Completely loosen the captive screws on the DSIC.
2.
Gently pull the DSIC out along the slide rails.
Figure3-3 Removing a DSIC
3.
Install a new DSIC. For the installation procedures, see "
If you do not install a DSIC, perform the following steps:
a.
Gently push a slot divider into the DSIC slot along the slide rails and tighten the screws.
Figure3-4 Installing the slot divider
b.
Install the filler panels into the slots and tighten the screws.
