2-12
Figure2-12 Removing the filler panel from a SIC slot
Figure2-13 Installing a SIC
Installing a DSIC
CAUTION:
Do not hot swap DSICs. Make sure the router is powered off before installing a DSIC.
You can only install DSICs on an MSR2630 router.
To install a DSIC:
1.
Remove the screws on the filler panels in slot 1 and slot 2 of the router to remove the filler
panels.
Figure2-14 Removing the filler panels
2.
Loosen the captive screws on the slot divider and pull out the slot divider.