64
Memory Bar Slot
Figure 49
Memory bar structure
Installing/Removing Memory Bar
Follow the steps below to install the memory bar:
Step1
Make sure all power interfaces are shut down, and then proceed.
Step2
Align the memory bar golden finger with the slot on the main board.
Step3
Make the memory bar to form an angle of 45 degrees with the main board and insert it into the slot.
Step4
Press the memory bar vertically until you hear a click. This indicates the memory bar is fixed within the
slot.
Step5
Check if the spring clip has locked the memory bar slot.
Figure 50
Install memory bar into the slot
Follow the steps below to remove the memory bar:
Step6
Make sure all power interfaces are shut down, and then proceed.
Step7
Press the spring clips on the two sides of the memory bar, and pull outwards levelly until the memory bar
separates with the spring clips and forms an angle of 45 degrees with the main board.
Step8
Remove the memory bar.