background image

58

C

HAPTER

 5: S

OFTWARE

 M

AINTENANCE

BootROM Password Loss

Contact the agent or our technical support personnel in the event of BootROM 
password loss. They can help you set a new password.

Modify the BootROM password under the main BootROM menu.

Enter <5> to modify the password following the prompt. The console terminal 
displays:

Change password.

Old password:

Enter the old password

New password:

Enter the new password

Verify:

Enter the new password again

........Password Set Successfully.

The new password is set successfully 

n

The password modification fails when old password is not correct or new 
password is not correctly entered, and then the system exits this operation.

Super Password Loss

The Super Password enables you to switch among the four Super levels. In the 
event of Super Password loss, you cannot perform the operations requiring higher 
right.

Enter <8> under the main BootROM menu to clear the Super Password.

Select this option, quit the menu and reboot the router. You can directly enter the 
system view. Only after the first rebooting will the setting take effect (the Super 
Password restores after the second rebooting).

Backing up and 
Restoring BootROM

Enter <7> under the main BootROM menu to enter the BootROM operation 
submenu. Refer to “BootROM operation submenu” on page 43 for details.

Enter <1> under the menu, and the system starts to backup the entire BootROM. 
The system prompts:

Backing BootRom....

Updating the backup Basic BootRom.......

Backing Basic BootRom Success!

Updating Back Extended BootRom..........

Backing Extend BootRom Success! 

Now, the entire BootROM is backed up to the memory.

Enter <2> under the menu to restore the BootROM in the memory to the system:

Restore Basic BootRom

Updating the Norm Basic BootRom..............

Restore Basic Bootrom Success!

Restore Extend BootRom

Updating Extended BootRom..............

Restore Extend Bootrom Success! 

Summary of Contents for MSR 20-20





























































Reviews: