2-1
2
Device Installation
Precautions
To ensure its proper operation and extend its longevity, consider the precautions when installing the
MS8000:
z
Install the MS8000 indoors.
z
Install the MS8000 in a place with good ventilation, especially around the heat dissipation holes. Do
not place any objects on the device.
z
Make sure the requirements on the environment temperature and humidity, and the power supply
are met.
z
Ground the MS8000 in equal-potential wiring. The grounding device must meet the requirements
for anti-interference and equipment safety, and shall not form short-circuit or contact with the
neutral wire of the high-voltage electrical network.
z
Keep the working environment clean. Dust buildup will cause electrostatic adsorption, which may
not only shorten the life of the MS8000, but also incur operation failure.
Installation Flow
Figure 2-1
Installation flow
Install the MS8000
in a rack
Select the
installation place
Start
Install the MS8000
on a workbench
Check
before installation
Finish
Check after
installation
Install the MS8000
in a rack
Select the
installation place
Start
Install the MS8000
on a workbench
Check
before installation
Finish
Check after
installation
Before installing the MS8000, make sure it is disconnected from the power source.
