2-1
2
Hardware of the OAP Card
The firewall card, IPS card and access controller module are similar in hardware structure and
appearance, except that the product model marked on the front panel and the loaded software of the
cards are different. The following hardware introduction is made on a firewall card.
Appearance
Figure 2-1
OAP card appearance
(1) Ejector lever
(2) Fastening screw (captive screw)
(3) Front panel of the OAP card
Front Panel
Appearance
Figure 2-2
Front panel of an OAP card
(1) CF card interface
(2) Management Ethernet port
(3) CF card status LED (CFS)
(4) Management Ethernet port status LED (Management)
(5) System status LED (RUN)
(6) PWR LED
Description of the LEDs
The front panel of an OAP card provides four LEDs, namely PWR, RUN, CFS and Management. Refer
to Table 2-1 for description of the LEDs.
