7
Installing the card
1.
Remove the filler panel (if any) from the target slot.
Keep the removed filler panel secure for future use.
2.
Unpack the interface card.
Figure 2 LSWM12H2Q interface card
(1) Ejector lever
(2) Latch
3.
Press the latch on the card to release the ejector lever.
4.
As shown by callout 1 in
, insert the card slowly into the
slot along the guide rails.
5.
Rotate inward the ejector lever as shown by callout 2 in
until the latch locks the ejector lever in place.
Figure 3 Installing the LSWM12H2Q interface card
