H3C LSQM1TGT24QSM0, User Manual, Page: 4 / 6

4
Figure 2 LSQM1TGT24QSM0 interface card
(1) Ejector lever (2) Latch
2. Press the latch on the interface card to release the ejector lever.
3. As shown by callout 1 in Figure 3 , insert the interface card slowly
into the slot along the guide rails.
4. Rotate inward the ejector lever as shown by callout 2 in Figure 3
until the latch locks the ejector lever in place.
Figure 3 Installing an LSQM1TGT24QSM0 interface card
Removing an interface card
CAUTION:
•
Before you remove an interface card, remove the cable from it
to avoid cable damage.
•
After removing an interface card, if no new interface card is to
be installed, install the filler panel as soon as possible to
prevent dust and ensure good ventilation in the device.
1 2
1
2