Manual version: APW102-20191215
BOM: 3123A1VF
i
H3C LSQM1SDNB0 SDN automation module
1 Identifier
The module identifier LSQM1SDNB0 is in the upper right corner of the front panel.
2 About the module
The LSQM1SDNB0 is an SDN automation module built with server components required for
ADCampus solutions. Plug and play, it supports fully automated deployment at small and
medium-sized campus networks. It can deliver controller, authentication, and address assignment
functions, eliminating the need for installing physical servers.
Figure 1 LSQM1SDNB0 front panel
(1) USB ports (3 in total)
(2) VGA connector
(3) Management Ethernet port
(4) Management Ethernet port LED (LINK/ACT)
(5) Console port (CONSOLE)
(6) Shutdown LED and button (SHUTDOWN)
(7) Ejector lever
(8) Captive screw
3 Specifications
Table 1 Module specifications
Item Specifications
Hard disk
480GB SSD
Memory
Two memory slots
Standard configuration: 64 GB (two 32GB memory bars)
Dimensions (H × W × D)
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)
Weight
3.40 kg (7.50 lb)
Power consumption
102 to 124 W
Hot swapping
Not supported
Ports
•
3 × USB2.0 ports (used by technical support for debugging only)
•
1 × VGA connector
•
1 × 10/100/1000BASE-T management Ethernet port
•
1 × console port (used by technical support for debugging only)
Ambient temperature
•
Operating: 0°C to 45°C (32°F to 113°F)
•
Storage: –40°C to +70°C (–40°F to +158°F)
