manualshive.com logo in svg

H3C H3C S3600 Series, Command Manual, Page: 89 / 1277

Share
Download
H3C H3C S3600 Series Command Manual Download Page 89

 

1-3 

View 

Any view 

Parameters 

interface-type

:

 

Interface type. 

interface-number

: Interface number. 

Description  

Use the 

display ip interface

 

brief

 command to display brief information about a specified or all Layer 3 

interfaces. 

With no argument included, the command displays information about all layer 3 interfaces; with only the 

interface type specified, it displays information about all layer 3 interfaces of the specified type; with 

both the interface type and interface number specified, it displays information about the specified 

interface. 

Related commands: 

display ip interface

. 

Examples  

# Display brief information about VLAN-interface 1. 

<Sysname> display ip interface brief vlan-interface 1 

*down: administratively down 

(l): loopback 

(s): spoofing 

 Interface               IP Address     Physical Protocol     Description 

 Vlan-interface1         192.168.0.39    up       up           Vlan-inte... 

Table 1-2 

Description on the fields of the

 display ip interface brief

 command  

Field 

Description 

*down 

The interface is administratively shut down with the 

shutdown

 

command. 

(s) 

Spoofing attribute of the interface. It indicates that the interface whose 
link layer protocol is displayed up may have no such a link present or the 
link is set up only on demand.  

Interface Interface 

name 

IP Address 

IP address of the interface (If no IP address is configured, “unassigned” 
is displayed.) 

Physical 

Physical state of the interface  

Protocol 

Link layer protocol state of the interface 

Description 

Interface description information.  

If the description has no more than 12 characters, the whole description 
can be displayed. If it has more than 12 characters, only the first nine 
characters are displayed. 

 

Summary of Contents for H3C S3600 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments