3-12
Note that the interface-related parameters configured previously would be invalid after RIP is disabled.
Examples
# Enable RIP and enter RIP view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rip
[Sysname-rip]
rip authentication-mode
Syntax
rip authentication-mode
{
simple
password
|
md5
{
rfc2082
key-string
key-id
|
rfc2453
key-string
} }
undo rip authentication-mode
View
Interface view
Parameters
simple
: Specifies to use plain text authentication mode.
password
: Plain text authentication key, containing 1 to 16 characters.
md5
: Specifies to use MD5 cipher text authentication mode.
rfc2082
: Specifies that MD5 cipher text authentication packets will use the packet format stipulated by
RFC2082.
rfc2453
: Specifies that MD5 cipher text authentication packets will use the packet format stipulated by
RFC2453.
key-string
: MD5 cipher text authentication key. If it is typed in the plain text mode, the length does not
exceed 16 characters. If it is typed in the cipher text mode, the length is 24 characters. The system will
display the MD5 cipher text authentication key with a length of 24 characters in the cipher text mode
when you execute the
display current-configuration
command.
key-id:
MD5 cipher text authentication identifier, ranging from 1 to 255.
Description
Use the
rip authentication-mode
command to configure RIP-2 authentication mode and its
parameters.
Use the
undo rip authentication-mode
command to remove authentication.
Only one authentication key is supported each time authentication is performed. An authentication key
newly input overwrites an old one.
Related commands:
rip version
.
