3
L
OGGING
ONTO
MSR S
ERIES
R
OUTERS
Logging onto an MSR
Series Router
You can log onto the MSR 20/30/50 series routers in the following ways:
■
Local login through Console port
■
Telneting to the router through an Ethernet interface
■
Remote login through AUX port or TTY port using Modem dialup
■
Login through NMS
Local login through Console port and telneting to the router through an Ethernet
interface are the most frequently used login methods in application. In this manual
we introduce these two login methods in details.
Local Login Through the
Console Port
Setting up local configuration environment
To set up the local configuration environment, RJ-45 connector of the console
cable needs to be connected to the console port on the router, and DB-9
connector to the serial interface of a PC, as shown in the following figure.
Figure 1
Local login through the console port
Setting the parameters for the console terminal
Set terminal parameters, taking the hyper terminal on Windows as an example. In
the Serial Attribute dialog box, set the baud rate to 9600, data bit to 8, no parity
check, stop bit to 1, and flow control to none. As shown in the following figure:
Router
PC
Console
Summary of Contents for H3C MSR 30-20 ROUTER
Page 4: ......
Page 8: ...8 CHAPTER 1 INTRODUCTION ...
Page 28: ...28 CHAPTER 2 FEATURE DESCRIPTION ...
Page 34: ...34 CHAPTER 3 LOGGING ONTO MSR SERIES ROUTERS ...
