H3C AR 46 Series Routers Installation Manual
Chapter 5 Maintaining Software
boot
device
:
wancom
←
Ethernet device name
processor
number
:
0
host
name
:
host
file
name
:
c:/share/vxWorks
←
Host file name
inet on ethernet (e)
: 192.168.0.90
←
IP address of the
Ethernet port on the main control board
inet on backplane (b)
:
host
inet
(h)
:
192.168.0.91
←
Host IP address
gateway
inet
(g)
:
user
(u)
:
user
←
FTP username
ftp password (pw) (blank = use rsh)
: password
←
FTP user
password
flags
(f)
:
0x0(FTP)/0x80(TFTP)
←
File transfer type
target
name
(tn)
:main.bin
startup script (s)
:
other
(o)
:
Enter a name behind the target name (tn) prompt for the file to be saved on Flash
memory. Alternatively, you may choose not to enter any name and use the file name
used for the last upgrade instead. If the file name already exists on Flash memory, the
following message appears after the file is downloaded asking whether you need to
overwrite the original file:
Loading...done
11162108 bytes downloaded.
flash:/main.bin already exist.
Overwrite it?(Y/N):
Enter <Y> to overwrite the original file or <N> to return to the Ethernet sub-menu.
z
Enter <6> in the Ethernet sub-menu to upload local configuration file to PC
through Ethernet interface.
z
Enter <7> in the Ethernet sub-menu to return to the main Boot ROM menu.
5)
Enter the boot file control sub-menu
Enter <5> in the main Boot ROM menu to enter the boot file control sub-menu. The
console screen displays:
Boot file control.
=====================<BOOT FILE CONTROL>===============
| <1> Display Available Boot File |
| <2> Set Main Boot File |
| <3> Set Backup Boot File |
| <4> Exit To Main Menu |
=======================================================
Enter your choice(1-4):
z
Enter <1> to view the available boot files:
5-8