Figure 3-5
Fix front mounting ears and load-bearing screws
Note:
There are three positions to mount a load-bearing screw on both sides of a switch. You should select a proper position
according to the actual requirements. The rear mounting ears tightly contacted with the load-bearing screws can support the
switch.
4)
Select a position to install the switch and fix the rear mounting ears to the rear brackets with screws and captive nuts, as
shown in Figure 3-6.
Figure 3-6
Fix rear mounting ears
5)
Hold the bottom of the switch with one hand and the front part of the switch with the other hand, and pull the switch into
the cabinet gently, as shown in Figure 3-7.
Screw 1: Used to bear the weight