H3C 6W101 Installation, Quick Start Download Page 1

2

1

Installation accessories

No installation tools are provided with the switch. Prepare them yourself as required.

Flathead screwdriver Phillips screwdriver

Needle-nose pliers

ESD wrist strap

Diagonal pliers

Marker

Installation tools

H3C Fixed Port Campus Switches Installation Quick Start-6W101

Mounting the switch in a rack

The applicable installation accessories vary by switch model. The packing list describes the 
accessories provided with the switch. For the accessories not provided with the switch, purchase 
them yourself as required.
To rack-mount a switch not provided with mounting brackets, purchase mounting brackets from 
H3C and prepare cage nuts and M6 screws yourself. 

Grounding cable

Releasable cable tie

Rubber feet

Cage nut and M6 screw

Power cord retaining clip 

Attach the front mounting brackets to the switch

Rubber hammer

Hammer drill

Screw anchor and screw 

!

Wear an ESD wrist strap during the installation. Make sure the wrist strap makes good skin contact 
and is reliably grounded. 

Attach a Type A front mounting bracket
near the power module side

Attach a Type A front mounting bracket
near the port side

!

This installation method is not applicable to a switch provided with both front and rear mounting 
brackets.
The applicable front mounting brackets and the installation positions for the brackets vary by 
switch model. Select an installation position for the mounting brackets as required. 
Two screws are required to attach a Type A, Type C, Type D, Type E, or Type F front mounting 
bracket. Four screws are required to attach a Type B front mounting bracket.

Using front mounting brackets

1

Rear mounting bracket 

and shoulder screw

Front mounting brackets and M4 screw

1

Other installation accessories

(Type D)

(Type C)

(Type B)

(Type E)

Standard front 

mounting brackets 

Product code: SOHO-SWITCH-FL-02

Product code: LS5-FL-D

Type of front 

mounting brackets

Figures

(Type F)

Product code: SOHO-SWITCH-FL-01

Long front mounting 

brackets

2

Heat gun

Wire stripper

(Type A)

Reviews: