Manual version: 6PW103-20180115
BOM: 3123A1AJ
iii
NOTE:
•
BIDI modules use different central wavelengths in transmit and receive directions, in order to
implement bidirectional transmission of optical signals over the same fiber.
•
BIDI modules must be used in pairs. For example, if an SFP-GE-LX-SM1310-BIDI is used at one
end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.
•
The 10GBASE-R-SFP+ port does not support the following SFP transceiver modules:
SFP-GE-T, and SFP-GE-T-D.
describes the SFP+ transceiver modules available for the SFP+ ports on the card.
Table 3 SFP+ transceiver module specifications
Module
Central
wavelength
Connector
type
Cable
specifications
Maximum
transmission
distance
SFP-XG-SX-MM850-A
850 nm
LC
50/125 µm multi-mode
optical fiber
300 m (984.25 ft)
850 nm
LC
62.5/125 µm
multi-mode optical fiber
33 m (108.27 ft)
SFP-XG-SX-MM850-D
850 nm
LC
50/125 µm multi-mode
optical fiber
300 m (984.25 ft)
850 nm
LC
62.5/125 µm
multi-mode optical fiber
33 m (108.27 ft)
SFP-XG-SX-MM850-E
850 nm
LC
50/125 µm multi-mode
optical fiber
300 m (984.25 ft)
850 nm
LC
62.5/125 µm
multi-mode optical fiber
33 m (108.27 ft)
SFP-XG-SX-MM850-F1
850 nm
LC
50/125 µm multi-mode
optical fiber
300 m (984.25 ft)
850 nm
LC
62.5/125 µm
multi-mode optical fiber
33 m (108.27 ft)
SFP-XG-LX-SM1310 1310
nm LC
9/125 µm single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LX-SM1310-D 1310
nm
LC
9/125 µm single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LX-SM1310-E 1310
nm
LC
9/125 µm single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LH40-SM1550 1550nm
LC
9/125 µm single-mode
optical fiber
40 km (24.86 miles)
SFP-XG-LH40-SM1550-D 1550nm
LC
9/125 µm single-mode
optical fiber
40 km (24.86 miles)
SFP-XG-LH80-SM1550 1550nm
LC
9/125 µm single-mode
optical fiber
80 km (49.71 miles)
SFP-XG-LH80-SM1550-D 1550nm
LC
9/125 µm single-mode
optical fiber
80 km (49.71 miles)
