background image

 

Regulatory Statements to be included in the Users Guide for Sputnik 

 

USA-Federal Communications Commission (FCC) 
 

This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy. If not installed and used in 
accordance with the instructions, it may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. 
 
If this equipment does cause harmful interference to radio or television reception, which 
can be determined by tuning the equipment off and on, the user is encouraged to try and 
correct the interference by one or more of the following measures: 
 
-Reorient or relocate the receiving antenna 
-Increase the distance between the equipment and the receiver. 
-Connect the equipment to outlet on a circuit different from that to which the receiver is 
connected. 
-Consult the dealer or an experienced radio/TV technician for help. 
 
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 
 

 

Summary of Contents for HRM-1000









Reviews: