|
15
Water Level Switch WPS 3000
danger!
When opening the device, live electrical components are
accessible. Make sure that you pull the mains plug out of the socket
before opening the device.
– Avoid direct water contact (spray or rain), dust and direct sunlight with the
main unit.
– Electrical components do not belong into the hands of children.
– All persons using, handling, installing, servicing and maintaining this device
must be trained and qualified for handling and repairing this device and
follow this user guide!
– When used in commercial facilities, the safety regulations of the professional
trade association for electrical installations and equipment must be followed.
– The use in schools, training centres, hobby-self-help workshops and the opera-
tion of components is to be supervised by trained personnel.
– Only original spare parts may be used, if the device is in need of repair. The
use of other components can be hazardous and can cause damage.
sensor assemBly
Mount the water level sensors at the points that you want to monitor. Plug the
RJ45 plug into the appropriate input socket of the unit. The sensor responds to
water contact at the two metal contacts. The sensor circuit is then closed. The
mounting height of the sensor defines the response point when the functions of
the main unit are activated. The sensor cable can be extended up to 25 m with
a double wire.
Water sensor
(included)
assemBly
Wandschelle
(Sensorhalter)
Dübel
W
and
Bef.-Schraube
Wassersensor
(Fixing screw and
dowel not included)
W
all
Water
sensor
dowel
Fixing
screw
Sensor
holder
