|
23
Automatic Charger HTC 2000
• Condensation may occur if the product is moved from a cold to a warm room.
Before connecting and switching on the mains voltage, allow the product to
reach room temperature. This can take several hours. If condensation in the
device takes place, not only the product can be destroyed, but there is also
the risk of electrocution!
• The product must never be touched with damp or wet hands. There is a risk of
electrocution!
• Keep the charging cable away from hot surfaces. Make sure it is not squashed
or damaged by sharp edges.
• Do not use the product if it is damaged. There is danger to life due to elec-
trocution!
• It can be assumed that safe operation is no longer possible if:
– the product has visible damage
– the product does not work or does not work properly (smoke or burning
smell, audible crackling noises, discoloration of the product or adjacent sur-
faces)
– the product has been stored under unfavourable conditions
– heavy transport stresses have occurred
• If the product is damaged, do not touch it, there is a risk of death from elect-
rocution! First switch off the mains voltage for the mains socket to which the pro-
duct is connected (switch off the corresponding automatic circuit breaker or
unscrew the fuse, then switch off the residual-current-operated circuit breaker).
Only then pull the mains plug of the charger out of the mains socket. Do not
operate the product anymore and take it to a specialist workshop or dispose
of it in an environmentally friendly way.
• It is essential to follow the charging instructions of the respective battery ma-
nufacturer when charging batteries.
• In case of improper handling (incorrect battery type, incorrect voltage range
or incorrect polarity and simultaneous failure of the protective devices of the
charger), the battery can be overloaded or destroyed. In the worst case, the
battery can explode, causing significant damage.
• Keep transmitter systems (telephones, transmission systems for model building,
etc.) away from the charger, as the transmitter radiation can disrupt the
charging operation or destroy the charger and batteries.
