PossiBLe CAuses FoR A ReDuCeD RAnGe:
1.
Walls, ceilings through which this signal has to
pass and especially the material of which they are
made of.
2.
Insulating windows in the car.
3.
Other radio sources operating on the same frequency
can significantly reduce the range (headphones, baby
monitors etc.).
4.
Interference of microprocessors from computers,
satellite receivers, TVs, photocopiers and other
electronic devices. (The receiver should have
enough distance from such devices)
5.
Conductive metal parts that are located near the
receivers or are near or within the direct path of the
transmitted signal. E.g. radiators, insulated glass
windows, enforced concrete walls and floors.
6.
The receiver should not be placed near large
motors. These can cause massive interference.
7.
All devices emitting a high frequency disturbance
of all kinds.
8.
Buildings and vegetation.
9.
The influence of the transmission pattern of the
antenna of the transmitter and receiver through
conductive surfaces or objects (including human
bodies or soil).
10.
Broadband interference in urban areas reducing
the signaltonoise ratio. The signal is no longer
detected in the “noise”.
imPRoVinG THe RAnGe:
If the range of your wireless remote control is too short,
you should observe the following tips:
1.
Are other electronic devices in operation or
causing the interference?
2.
Place the receiver at a different location. A few
inches can make a big difference.
3.
Are the batteries in the transmitter still working?
5. mALFunCTion
If it can be assumed that safe operation is no longer
possible, the device must be taken out of operation and
secured against unintentional operation.
This applies if:
– The device has visible damage
– The device is no longer functional
– Parts of the device are loose
If the device needs to be repaired, only original spare
parts may be used! The use of alternative spare parts
can lead to serious damage and personal injury.
Service and repair work may only be carried out by a
specialist or a trained person under the direction and
supervision of a qualified electrician. Should the device
become malfunctioned, we recommend sending it to
us for repair.
– In schools, training facilities, hobby and DIY work
shops, the operation and assembly must be monitored
by trained personnel.
– If the device needs to be repaired, only original spare
parts may be used! The use of spare parts that are
not original, can lead to serious damage to property,
malfunction and personal injury!
– Dispose of unnecessary packaging material or keep
it in a place that is inaccessible to children. There is a
risk of suffocation!
