18
| Operation
M
ur
Capteur
d
’
eau
Che-
ville
Vis de
fixation
–
The use in schools, training centres, hobby-self-help workshops and the oper-
ation of components is to be supervised by trained personnel.
–
Only original spare parts may be used, if the device is in need of repair. The
use of other components can be hazardous and can cause damage.
SENSOR ASSEMBLY
Mount the water level sensors at the points that you want to monitor. Plug the
RJ45 connector into the appropriate input socket of the unit. The sensor re-
sponds to water contact at the two metal contacts. The sensor circuit is then
closed. The mounting height of the sensor defines the response point when the
functions of the main unit are activated. The sensor cable can be extended up to
20 m.
WATER SENSOR
(included)
NOTE:
Install all cables securely, so that they do not become a hazard and
that they cannot be tripped over.
GETTING STARTED/FUNCTION TEST
After installation of the water detector WPS 3000plus, a functional test should
be performed. The main unit should be plugged into a grounded socket (220 to
240 V/AC), mounted according to the VDE regulations. The
“
Power
”
LED will
become green, indicating that the unit is in operation. Set the slide switch e.g.
ASSEMBLY
(Fixing screw and
dowel not included)
Fixing
screw
Sensor
dowel
holder
Water
sensor
Wal
l
