Function Key
Features Settings
114
This feature is not available on all servers. For more information, contact your system
administrator.
Zero Touch
You can use this key feature to configure auto provision and network parameters quickly.
This feature is supported on the version 1.0.3.82 or later
To configure the zero touch via phone interface
1.
Press Menu
→
Features
→
Function Keys
→
Line or Memory keys as Function Keys
→
Memory key1(for example)
2.
Select the wanted Line or Memory key.
3.
Press
and
or press
key to select the zero touch
4.
Press
or Save soft key to save the configuration
To configure the zero touch via web interface:
1.
Click Function keys
→
Memory Key.
2.
Select the desired Key and select zero touch in the Type.
3.
Click the
button to save the configuration.
To use the zero touch feature on the user interface:
1.
Press the zero touch key when the IP Phone is idle.
2.
The IP Phone will enter the WAN Port interface, you can change the WAN Type by pressing
the Navigation keys.
3.
Press the Next softkey to enter Network interface, then you can configure some information.
4.
Press the Next softkey again, you can configure auto provision information.
5.
When you finish the setting, you can press the OK to accept the changes.
