12
www.myhtec.com
Fig. 4: Filling
■
Open the shut-off valve on the tube.
■
Fill the water reservoir up to the mark with distilled water (
σ
< 2 µS/cm) as shown in figure
4.
■
Fill the hydrogen storage tank up to the mark with distilled water (
σ
< 2 µS/cm) as shown in
figure 4.
■
Briefly open the cap on the
electrolyzer
until a small amount of water comes out of the
opening. Close the cap again.
■
Fill the hydrogen storage tank again up to the mark with distilled water (
σ
< 2 µS/cm).
Filling
dist. H
2
O
σ
< 2
μ
S/cm
