Prime Alternatives Free call 1800 333 505
Ensure the table end of the lock bars are seated properly into the plastic mounting blocks on the underside of
the table, if not it is necessary to tap them gently into place with a hammer.
The end of the bar should be flush with the edge of the plastic mounting block and not protruding or recessed.
PROBLEM: REMOVEABLE FACE CREST BAR SLIPS OR IS LOOSE.
Possible solutions:
1.
Hold the locking nut opposite the locking bar and turn the locking bar a half-turn clockwise to tighten. Check
tightness of face crest bar and repeat if necessary. To loosen the lock bar - turn anticlockwise.
2.
Tighten the screws on the mounting brackets under the tables.
3.
If the above has been completed & the problem is not resolved call …………..for service.
