manualshive.com logo in svg

h/p/cosmos airwalk ap, Original Instructions For Use, Page: 30 / 43

Share
Download
h/p/cosmos airwalk ap Original Instructions For Use Download Page 30

file: n:\article\cos101676-en\20210629_cos101676-en_hpcosmos_airwalk_ap_unweighting_ifu_iim_manual.docx 

© 1988 - 2021 h/p/cosmos sports & medical gmbh     phone +49 86 69 86 42 0     [email protected]     created 29.06.2021     printed 29.06.2021     page: 30 of 43 

 

 

4.

 

 

 

Place component box (1) on a 
clean and level surface. 
 
Put adapters (2) on top of the 
component box and fix with 
12x M10x25 cylinder head 
screws with washers. 
 
ATTENTION: slide the 6mm 
tubes through the 
corresponding holes of the 
component box. 

5.

 

 

 

Put cardboard padding under 
the marked areas of 
component box and arch tips 
and tilt box so that the arches 
(3) can be fixed with 12x 
M10x25 cylinder head screws 
with washers while the box is 
held by a second person.  

6.

 

 

 

Connect the arch tips with the 
cable guide module (4) using 
the 4x M10x100 hex head 
screws, 8x washers and stop 
nuts.  
 

7.

 

 

 

Pull rope through arch square 
tube to exit through the top 
hole. 
Assemble arch, pulley and 
pulley cover plate as depicted 
(fit cover plate noses in 
corresponding notches).  
 

Summary of Contents for airwalk ap












































Reviews:

No comments